home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / dcom / modems-part1 / 1011 < prev    next >
Encoding:
Text File  |  1996-08-05  |  3.1 KB  |  75 lines
  1. Newsgroups: comp.dcom.modems
  2. Path: news2.new-york.net!not-for-mail
  3. From: roccella@bc.cybernex.net (Matthew Roccella)
  4. Subject: Re: Error-control off or unknown??????
  5. X-Newsreader: Forte Free Agent 1.0.82
  6. X-Nntp-Posting-User: (Unauthenticated)
  7. Message-ID: <DKyq0u.FvI@news2.new-york.net>
  8. References: <4ciq1l$r1l@swing.iinet.net.au>
  9. X-Nntp-Posting-Host: cnj87.cybernex.net
  10. Date: Wed, 10 Jan 1996 11:53:47 GMT
  11.  
  12. rayw@ois.com.au (Ray Whiteside) wrote:
  13.  
  14. >01-05-1996 08:15:35.64 - Hanging up the modem.
  15. >01-05-1996 08:15:35.64 - Send: <cr>
  16. >01-05-1996 08:15:37.65 - Send: ATH<cr>
  17. >01-05-1996 08:15:37.79 - Recv: <cr><lf>OK<cr><lf>
  18. >01-05-1996 08:15:37.79 - Interpreted response: Ok
  19. >01-05-1996 08:15:38.18 - Session Statistics:
  20. >01-05-1996 08:15:38.18 -                Reads : 34 bytes
  21. >01-05-1996 08:15:38.18 -                Writes: 32 bytes
  22. >01-05-1996 08:15:38.18 - Simplemodem 288f closed.
  23. >01-05-1996 08:15:45.12 - Simplemodem 288f in use.
  24. >01-05-1996 08:15:45.20 - Modem type: Simplemodem 288f
  25. >01-05-1996 08:15:45.20 - Modem inf path: MDMAUS.INF
  26. >01-05-1996 08:15:45.20 - Modem inf section: Gen288
  27. >01-05-1996 08:15:45.45 - 57600,N,8,1
  28. >01-05-1996 08:15:46.49 - 115200,N,8,1
  29. >01-05-1996 08:15:46.51 - Initializing modem.
  30. >01-05-1996 08:15:46.51 - Send: AT<cr>
  31. >01-05-1996 08:15:46.52 - Recv: AT<cr>
  32. >01-05-1996 08:15:46.66 - Recv: <cr><lf>OK<cr><lf>
  33. >01-05-1996 08:15:46.66 - Interpreted response: Ok
  34. >01-05-1996 08:15:46.66 - Send: ATE0V1<cr>
  35. >01-05-1996 08:15:46.67 - Recv: ATE0V1<cr>
  36. >01-05-1996 08:15:46.79 - Recv: <cr><lf>OK<cr><lf>
  37. >01-05-1996 08:15:46.79 - Interpreted response: Ok
  38. >01-05-1996 08:15:46.79 - Send: ATX3<cr>
  39. >01-05-1996 08:15:46.93 - Recv: <cr><lf>OK<cr><lf>
  40. >01-05-1996 08:15:46.93 - Interpreted response: Ok
  41. >01-05-1996 08:15:46.93 - Dialing.
  42. >01-05-1996 08:15:46.93 - Send: ATDT#######<cr>
  43. >01-05-1996 08:16:04.95 - Recv: <cr>
  44. >01-05-1996 08:16:04.95 - Interpreted response: Informative
  45. >01-05-1996 08:16:04.95 - Recv: <lf>
  46. >01-05-1996 08:16:04.95 - Interpreted response: Informative
  47. >01-05-1996 08:16:04.97 - Recv: CONNECT 115200
  48. >01-05-1996 08:16:04.97 - Interpreted response: Connect
  49. >01-05-1996 08:16:04.97 - Connection established at 115200bps.
  50. >01-05-1996 08:16:04.97 - Error-control off or unknown.
  51. >01-05-1996 08:16:04.97 - Data compression off or unknown.
  52. >01-05-1996 08:16:04.97 - Recv: <cr>
  53. >01-05-1996 08:16:39.80 - 115200,N,8,1
  54. >01-05-1996 08:22:14.55 - Remote modem hung up.
  55. >01-05-1996 08:22:14.58 - Recv: <cr><lf>NO CARRIER<cr><lf>
  56. >01-05-1996 08:22:14.58 - Interpreted response: No Carrier
  57. >01-05-1996 08:22:17.85 - Session Statistics:
  58. >01-05-1996 08:22:17.85 -                Reads : 7331 bytes
  59. >01-05-1996 08:22:17.85 -                Writes: 6976 bytes
  60. >01-05-1996 08:22:17.85 - Simplemodem 288f closed.
  61. >I have tried to  enable error control & data compression in  the
  62. >advanced section,but the boxes are not clickable,does anyone know why 
  63. >TIA ,   Ray
  64.  
  65.  
  66. Somewhere in your program, you should be able to add a modem init
  67. string. If so, add: \Q3\N6
  68.  
  69. \Q3 turns on hardware flow control and \N6 will enable error detection
  70. and compression if the modem on the other side has it. Hope this
  71. helps!
  72.  
  73. Matthew
  74.  
  75.